Resetting the Time on Your Telephone Set
Eagle Sets - must be activated at telephone with a SET key
Press SET key (internal dial tone will be heard)
Press the *key on the keypad followed by a four digit code corresponding to the current time in twenty-four hour mode.
{*} {h} {h} {m} {m}
{h} {h} = hour (01-12)
{m} {m} = minutes (00-59)
If no error (s) are encountered, the new time will be displayed on the station's clock in the format hh:mm for ten seconds and a confirmation tone will be heard.
All phones display the correct time according to their individual programming. If an error is encountered, an error tone will sound and no change will occur.
Back to TopPress the MENU key.
Press the softkey below OPTIONS.
Press the softkey below CLOCK. Display will indicate CLOCK RING SCRN DONE
Press the softkey below the "+", or the softkey below the "-" to scroll through the choices. Clock display format is MMM DD, YYYY HH:MM AM or PM. The field being changed is displayed on the first line.
Press the softkey below NEXT or go to the next field.
When the last field is changed, press the softkey under DONE to confirm your choices.
Back to TopPress Register (softkey4), then press 2 on the numeric keypad and press ENTER (softkey1).
Press ENTER again. A new line appears.
Input the hour and press ENTER.
Input the minutes and press ENTER.
Input 0 for AM or 1 for PM and press ENTER.
Input the year and press ENTER.
Input the month and press ENTER.
Input the date and press ENTER.
When COMPLETE appears on the display; press REGISTER (softkey 4) to exit the menu. After you exit the menu, the display should read: current time; day of the week; month and date.
Back to TopPress REGISTER (softkey 4), then press 3 on the numeric keypad and press ENTER (softkey1).
Press ENTER again. A new line appears.
Input the hour and press ENTER.
Input the minutes and press ENTER.
Input "0" for AM or "1" for PM and press ENTER.
Input the year and press ENTER.
Input the month and press ENTER.
Input the date and press ENTER.
When COMPLETE appears on the display; press REGISTER (softkey 4) to exit the menu. After you exit the menu, the display should read: current time; day of the week; month and date.
Back to Top