HOW TO SPID A 970 ISDN TELEPHONE SET

When the telephone display reads "VERIFY SPID", "SPID ERROR", "SPID NG" or if the LCD is blank, follow the instructions below to SPID the telephone set.

 

·        Select the menu button located directly to the right of the dial pad.

·        Press the down arrow located to the right of the display screen one time.

·         Note: Soft keys are located below the display screen.  Press the soft key below CONFIGURE. The display will flash, "INCORRECT CONFIGURATION MAY PREVENT SERVICE".  Note: The message will go away before you execute the next step)

·        Press the soft key under BASIC.                    

·        The SPID Configuration selection screen appears. Press the soft key under SINGLE.

·        The display will read, "ENTER PRIMARY SPID." Using the dial pad, hit the CLEAR button, then enter 804 + 7 digit number + 0101.

·        Press the soft key under DONE.

·        The display will read, "REQUEST DOWNLOAD?" Press the soft key under YES.  The display will read, "PARAMETER DOWNLOAD IN PROGRESS." After the download is complete, the message should read, "PARAMETER DOWNLOAD HAS BEEN SUCCESSFUL UPDATING THE PHONE." Make sure there is dial tone and make a test call.