HOW TO SPID A 1050 NATIONAL ISDN TELEPHONE SET

When the telephone display reads "VERIFY SPID", "SPID ERROR", "SPID NG" or if the LCD is blank, follow the instructions below to SPID the telephone set.

 

·        Press the key menu button located in the top right hand corner of the phone. The display identifies 3 of the 4 soft key buttons located directly below the display. (See example)

                  Ex: ENTER              NEXT           CLEAR                  REG

                              ▆                     ▆                       ▆                         ▆                 

·        Press the soft key button directly below "REG." The display introduces a menu allowing you to select 1-13 options.

·        Press the #8 on the dial pad that is the option to SPID.

·        Press the first soft key button identified as ENTER. The display reads "ENTER SPID."

·        From the dial pad, enter 804 + 7 digit number of the phone + 0101.

·        Press the first soft key button identified as ENTER. The display reads "SPID ASSIGNMENT END." This message will remain on the display a few seconds to allow the configurations to download. After the SPID assignment is complete, the display will go back to the menu options indicating that the SPID was successful. Press the fourth soft key button to clear menu options.  Make sure there is dial tone and make a test call.